Cage fitting P3 & subframe

With the majority of the cage in place I set about adding a B-pillar support and also started to polish the frame and smooth out the welds so that the profiles blend together without compromising the welds.

With the frame coming together I decided to take some time away from the grinder and spend some time working on the seat frame to allow the new style of seats to mount to the runners. Once the box section was cut and placed onto the frame I tack welded the across bars in which fits the seats perfectly so this is ready for the belt bolts. With the frame in I had to cut and change the position of the handle for sliding the seat, it was taken from the side and move to the centre with a angle change.