Cage fitting P2

Glad to be back working on the car after taking some time off to get on with other projects, I have decided to get the project moving and put the car back together

With the main hoop in place and the two sides attached, I notched and added a cross bar, originally I did plan to have 2 bars but have re-arranged the layout of the cage

With the cross bar tacked into place I then placed the seats in to give the needed height for the harness bar, the top harness bar is to be attached in to the main hoop, this was notched and placed into the main hoop

With the top harness bar in the car the lower harness bar was then added

With all the bars in place I stared to fully weld the cage starting at the top and will continue welding next time I am working on the car.


I am pleased with the outcome of the cage and so far have only been trapped between the cage once as I crawl through to weld.



With the bars in place I then put the seats back in to ensure that both them and myself fitted with no issues. Once I have made the seat runners and I am happy with the seat height I will be re-trimming the seats to match the planned interior.